Stay in the Loop
Be the first to hear about new BSB products, merch drops, and brand news — straight from the source.
Upgrade your stance and wheel fitment with American-made precision. BSB USA wheel spacers are engineered and machined in the United States from high-strength 6061-T6 billet aluminum. Each spacer is CNC-machined to exact tolerances with a precision-machined 124.9mm center bore for an accurate hubcentric fit, then anodized black for corrosion protection and a clean finish.
Built for Ford F-250 and F-350 Super Duty trucks and the Ford Excursion with an 8x170 bolt pattern and 14x1.5 wheel studs. These 1.5" (38mm) bolt-on spacers move each wheel outward 1.5 inch, adding clearance for brake calipers and suspension components and filling out the stance for wider wheels and tires.
Features:
Compatible With:
Fits trucks with 14x1.5 wheel studs. Some Super Duty trucks use 14x2 studs; confirm your stud size before ordering.
Fitment Note for 2017+ Models: These spacers are compatible with 12-bolt rear axles. They are not compatible with 14-bolt or 16-bolt rear axles.
The most reliable way to verify your rear axle is to count the bolts on the rear differential cover:
General Model Guide:
Because tow-package options vary, counting the bolts on the diff cover is the most accurate way to confirm compatibility before ordering.
Installation Details: The hubcentric lip on these spacers is intentionally machined very thin to allow correct fitment on the rear of Ford Super Duty trucks. Because the lip is thin, take extra care during installation:
When installed correctly, the hubcentric lip provides the same centering function as a thicker lip. Improper installation or forcing the spacer onto the hub can damage the lip or prevent proper seating.
Specifications:
Installation:
Clean the hub face, mount the spacer flush on the hub with the included lug nuts, then mount the wheel to the spacer's studs. Make sure your factory studs do not touch the back of the wheel; trim or replace them if they do. Confirm full thread engagement on every lug nut (7.5 turns on 14x1.5). Torque with a hand torque wrench to the factory spec, not to exceed 110 ft-lbs, and re-check torque after the first 25 miles, including the nuts holding the spacer to the hub.
Proudly Made in the USA
Every BSB USA spacer is machined, anodized, and inspected in the United States using U.S.-sourced aluminum. No compromises, just American craftsmanship built for drivers who demand quality.